- published: 30 Jan 2013
- views: 1455
Subsea ROV operations to remove a piece of metal from the riser pipe, piece is not removed in this video.
Chess Subsea Engineering is a surface, marine & naval architecture, hydrodynamics and subsea production systems engineering design & analysis consulting, competence based training & research and development company, with proven competence in delivering results to client’s satisfaction. We provide world class design and engineering consulting services in the areas of Marine & Naval Architecture Offshore and Subsea & Hydrodynamics Engineering that stands out for their quality, enabling Oil Majors as well as marginal E&P hit their production objectives. For all inquiries on our consulting engineering design services, trainings, research & development; please visit www.chesssubseaengineering.com or email us directly via firstname.lastname@example.org
http://www.belzona.com/en/focus/composite_repairs.aspx Belzona repair composites and epoxy coatings provide a cost-effective solution to repair and prevent seawater corrosion on offshore structures such as risers and platform legs. The offshore environment is home to natural occurring corrosion. Erosive action in splash zones and underwater areas often expose metal to a corrosive, wet atmosphere and to the impact from waves and debris, which causes damage to equipment and machinery. If the problems are not addressed at an early stage, they can ultimately lead to extensive damage and loss of structural integrity including leaks or ruptures. This will result in high repair or replacement costs, downtime and environmental hazards. Belzona range of repair composites and epoxy coatings can b...
Demonstration of Covercat's underwater coating application process.
https://miragemachines.com/products/subsea-tooling/rov-tooling/diamond-wire-saws/diamond-wire-saws/ Designed for underwater cutting on pipes, multistring casings, piles, platform legs and wellheads in the oil and gas industry, the Diamond Wire Saw is ideal for quickly cutting through dissimilar materials.
Ryan Buntain, Materials Science and Engineering Title: Hydrogen Assisted Cracking in Dissimilar Metal Welds for Subsea Service under Cathodic Protection Three Minute Thesis (3MT®) is a research communication competition developed by The University of Queensland (UQ) whereby PhD students have three minutes to present a compelling oration on their thesis and its significance. 3MT challenges students to consolidate their ideas and research discoveries so they can be presented concisely to a non-specialist audience.
DeepOcean is on an innovative quest for more complex, deeper, cost efficient and safer subsea operations. Some claim we are into rocket science, subsea. Letting our network of clients and other stakeholders take part in our achievements is important to us. We really appreciate our first 25 000 followers on LinkedIn. Pass it on…
Chukar Waterjet's deepwater subsea waterjet system uses ultra-high pressure water to safely cut underwater pipes. The system is operable to 3000 meters under water. In this video, we demonstrate outer diameter pipe cutting. We also can from inside the pipe. http://www.chukarwaterjet.com
Building a Travelift launching pier in Ocean World Marina, Puerto Plata Dominican Republic Marine construction in the Dominican Republic. We specialize in marine construction and pile driving services, we drive 40"+ steel piles to a tip of 25' , this machine did the job just right, we set record time and save money. WEB http://www.maratlantico.com.do EMAIL email@example.com TEL 809 669 7660
MV1-SS TOP-ENTRY BALL VALVES 20" CL. 300 c/w Subsea Gear Forged Body in LTCS + Inconel 625 Weld Overlay, Trim: Duplex Metal-Seated+TCC, Lipseals, Dual Seat Design (SR+DPE) Integral Hyperbaric Chamber Test High Pressure Gas Test EPC: Sapura End-User: Brunei Shell Petroleum Subsea Brunei, 40m depth
Gold alone found on the sea floor is estimated to be worth $150 trn. But the cost to the planet of extracting it could be severe. Check out Economist Films: http://films.economist.com/ Check out The Economist’s full video catalogue: http://econ.st/20IehQk Like The Economist on Facebook: https://www.facebook.com/TheEconomist/ Follow The Economist on Twitter: https://twitter.com/theeconomist Follow us on Instagram: https://www.instagram.com/theeconomist/ Follow us on LINE: http://econ.st/1WXkOo6 Follow us on Medium: https://medium.com/@the_economist
Releasing a seized on steel wellhead tree cap underwater in the South China Sea, using a diamond wire saw.
Cutting torches, The PVL underwater cutting torch is the result of more than 10 years of development and testing under highly diverse conditions. This demanding process has led to the new model torch, which works appreciably faster and more efficient than conventional underwater cutting torches.
The subsea version of the Multiphase Flow Meter by Pietro Fiorentini. Main Features: • Gamma densitometer • HP/HT Design • Deep water applications • Remote operation from safe area • Fully retrievable electronic • Duplicate hardwaree for redundancy • Low power consumption • No manteinance - 25 years lifetime • 0-99% GVF • 0-100% WC • All flow conditions • Sour service • Glass to metal sealings
CAD Annimation of a Destec G4SB Single Bolt Subsea Clamp Connector The Destec GSB Single Bolt Clampset is a purpose designed unit for operations where a conventional four bolt G-RANGE Clampset would be impractical. The GSB Clampsets are supplied with a mounting plate which can if required accommodate guidance / pull-in systems for ease of alignment and provision for stab connectors for electrical and hydraulic circuits. Standard G-Range type hubs with the metal to metal Seal Ring can be used, or the customers own sealing arrangement can be employed. Larger sizes and special designs (Dual Bore / Multi Bore / Concentric Bore) can also be accommodated. For example some GSB Clamps have been supplied with fabricated Spool pieces for mating to flexible risers. For Subsea applications the ...